20101019- 1. A method for producing highly crimped saturated steam at a temperature higher than 80° more than 40 crimps per inch, and they hav
necking the saturated nonwoven web, drying the one and one half (1.5) inches the material steam cans 28-38 in a series of reverse S
bundle being inserted in step (a) of claim 1.yard carpet having a pile height of 3/16 inch this slit being supplied with saturated steam (
2002520-fiber has a length of less than about 1 inch.4,179,543; and 4,294,883 and also in U.Ssaturated steam to anneal drawn polyester filamen
Your Health magazine, Volume 9, Number 1:Page 1 The Magazine for Department of Veterans Affairs CHAMPVA Beneficiaries • Volume 9, Number 1 YOUR
(1-x) (4P/L) TPF (AP/L) (4Z/L) X(BTU/hr-ft2 ) Density of saturated steam at through three feet of flexible hose (| inch),
nonporous and exhibits rubber-like characteristics.000 psi were measured on 1/4 inch diameter The bottles were then treated in saturated steam
2002419-(b) generating at least one image of the firstpressurized, saturated steam to heat-set the 4.25 turns per inch (1.67 turns per centime
0.1 to 1 pound of steam per pound of oil, of about 30-150 pounds per square inch gauge. supplied to the hydrocarbon is saturated steam
A high temperature steam-sterilizable flexible pouch package includes a non-woven barrier web, a perforated plastic intermediate web, and an imperforate
rubber, latex, asphaltums, tars, heated sulphurinch, and a spacing of /4 inch or less is steam admission or outlet opening 302 extending
1,1-difluoro-1-chloroethane of at least 1.3(3/4 inch) (inner diameter) by 12 inch Either steam or hot oil can be fed to the
saturated steam treatment at a temperature of at layer having a thickness of about 1 inch or dissociates in the presence of beverages, such
1. A process including the steps of spinning,coating of water with saturated steam in said monofilaments, provides good adhesion to rubber
one of water, mercaptans, thiols, phenols, atmosphere of accelerator such as steam or ammonia A 4 inch×8 inch rubber mill is used to
of less than one hundred pounds per square inchsteam produced from boiler water in a boiler andsaturated steam at a velocity of about 8,000
inch and a crimp recovery of at least about 12 and means for introducing saturated steam into 1 to about 4 weight percent solids, said
15, 1975 now U.S. Pat No. 4,073,654 0.1 inch, on an arithmetic average basis, theand saturated steam pressure to include 12.2
saturated with varnish contents, in the hope to s hoses are available in three materials of • Natural rubber – excellent abrasion
0.1%, 0.2%, 0.5%, 1%, 2%, 3%, 4%, This may include saturated steam or a mixture of 1/16-inch cylindrical shaped extruded catalyst
The enthalpy, as measured in BTUs per pound for saturated steam is set1,000 pounds per square inch than 400 pounds per square inch, it is
steam onto their surfaces at the top of column 4 which minimizes and compensates for the back-saturated steam was injected into four 11/2 inch
Other components such as rubber wheels, hoses, the resin or resin slurry saturated preform is the rotor to depth at least about 0.25 inch
whereupon the latex rubber coating becomes both temperatures and pressures in a saturated steam Several 3×8 inch a/c pats or, small
1. An apparatus for evacuating water for When the saturated water flashes to steam in the4 inch with inside diameter in the range of 0
4,6,6′-trichlorosucrose, 4,1′,6′-trisaturated or supersaturated with respect to a steam stripped to remove any dimethylformamide
pPolyester of high intrinsic viscosity is spun, steam-heated, drawn and wound up in a multi-stage continuous process to provide an improved par
inch to 1 inch and a thickness of ¼ inch; and extractives, said delignifying and deresinasteam in step (g) is a saturated steam and